Here’s what you’ll find out on this page…
- What’s in the book.
- Where can I get one?
- How to print and set-up the book.
- Sample of the Flip Book
- Videos showing how to make cards, envelope and scrapbooking stickers.
- and more
This is how I print and set-up my book.
I use Adobe Acrobat Reader to open and print my PDF books.
Print in full color on a full 8.5” x 11” paper.
On landscape setting and on only one-side of the paper…not both sides.
I print everything out on copy paper and put my book together, and then, when I need a particular page I print that page again (usually on a heavier paper), depending on what I may need it for. Most of the pages are numbered so it won’t be difficult to print out the ones you need.
PUTTING THE BOOK TOGETHER – you could keep the book together by simply using a bull-clip or a binder clip like this:
-or- – – use a three-hole punch – – –
You could use a three hole punch and either some binder rings or an actual binder. (I use a binder myself)
When using a binder, I do not punch holes in the Cover Page, but slip it in the front plastic sleeve of the binder’s cover.
And whether I use the binder or the rings, I can open like this to see what pages I’d like to work on and print to make that particular project!
Making the Flip-Book
You can use a 2 hole punch,
or if you do not have a two-hole punch, you can use a single hole punch, there are marks on the top of each Flip-Book page to guide you!
Here are some photos of the inside and a couple of videos of how I use the book…
If you have questions or comments just email me at [email protected]. Thanks!